Examination of experts on non-destructive testing in accordance with international and European requirements.
Examination center JE "Technical Supervision Company DIEKS" LLC carries out qualified exams of NDT-personnel on the 1 and 2 levels of qualifications in accordance with the requirements of international standard ISO 9712:2012 «Non-destructive testing - Qualification and certification of NDT personnel» with a purpose of their further certification by the Personnel Certification Body in the field of non-destructive testing, in the following NDT methods in the following sectors:
| NDT Method | Sectors*¹ | ||
|---|---|---|---|
| product sectors | industrial sectors | ||
| Visual testing (VT) | с, f, w, t, wp | 6, 7 | |
| Penetrant testing (РТ) | с, f, w, t, wp | 6, 7 | |
| Magnetic particles testing (МТ) | с, f, w, t, wp | 6, 7 | |
| Eddy current testing (ET) | с, f, w, t, wp | 6, 7 | |
| Ultrasonic testing (UТ) | с, f, w, t, wp | 6, 7 | |
| *¹ - designations of product sectors according to ISO 9712:2012 | |||
| Product sectors | Industrial sectors | ||
| 1 (c) – castings; | 6 - manufacturing (combination of product sectors: c, f, w, t , wp) | ||
| 2 (f) – forgings; | 7 - pre and in-service testing which includes manufacturing | ||
| 3 (w) – welds; | (combination of product sectors: c, f, w, t , wp) | ||
| 4 (t) – tubes and pipes, including flat products for the | |||
| manufacturing of welded pipes; | |||
| 5 (wp) – wrought products except forgings; | |||
At your request, qualifying examinations may be held on the technical base of the Customer, in full compliance with all procedures for qualifying examinations, by prior agreement of all the nuances with the Examination Center.
- The Examination Center is equipped with modern instruments and equipment of leading domestic and foreign manufacturers for qualifying exams for non-destructive testing methods included in the scope of recognition Center.
- Examiners of the Examinations Center are highly qualified NDT-specialists, certified by the 3 level of qualification in accordance with the requirements of ISO 9712:2012, who have extensive experience in conducting qualifying examinations and practical experience in carrying out NDT of industrial products and technical diagnostic of high risk equipment.
- The Examination center has the necessary funds to international and European normative documents for NDT, allowing to provide a process for qualifying examinations of all necessary regulatory documentation as to the methods of non-destructive testing, and by industrial sectors.
- Examination specimens, which are used for examination, are the real parts of industrial products or parts and components of high-risk equipment that allow professionals to gain some practical NDT experience directly in the process of examination.
Permitting documents proving our competence for the provision of the above services:
